Home / Products / Municipal Engineering Pipe System / HDPE Water Supply Pipe / Large Diameter OD1800mm HDPE Pipe for Water Supply
1. Non-toxic. The HDPE material is non-toxic and tasteless. It belongs to green building materials and never scaling through the strict health test, which can effectively improve the water quality.
2. Low flow resistance. The Smooth inner wall is easy for pipeline transportation Under the same condition, HDPE pipe' s delivery capacity can be increased by 30%, as its roughness is much less than hat of steel pipe and glass reinforced pipe.
Description
1. Non-toxic. The HDPE material is non-toxic and tasteless. It belongs to green building materials and never scaling through the strict health test, which can effectively improve the water quality.
2. Low flow resistance. The Smooth inner wall is easy for pipeline transportation Under the same condition, HDPE pipe' s delivery capacity can be increased by 30%, as its roughness is much less than hat of steel pipe and glass reinforced pipe.
3. No Leakage HDPE pipe is connected in the ways of butt fusion, socket fusion and electrofusion, which means the strength of joint point is higher than tube itself.
4. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site.
5. Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency.
6. Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation.
7. Long life-span. Designed 50 years service life under rated temperature and pressure.
8. Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the worker' s labor intensity and improve work efficiency.
1. Urban area water-supply work system. Large diameter HDPE pipe is healthy and non-toxic and more suitable for urban water supply main conduit and buried tube.
2. Replace cement tube, iron pipe and steel tube. Applicable for renovation project and does not need large area excavation, HDPE pipe can be widely used in old town of pipe network reconstruction.
3. Industrial materials transmission pipe. Chemical industry, chemical fiber, food, forestry, pharmacy, light industry and papermaking, metallurgical and other industrial raw material conveying pipe.
4. Landscaping water supply network. As landscaping project needs lots of water supply pipes, HDPE pipe is the best choice for its toughness and low costs.
5. Sewage discharge pipes. HDPE pipe have unique corrosion resistance, can be used as industrial wastewater and sewage discharged pipe.
6. Ore and mud transfers HDPE pipe has high resistance to stress and wear resistance, can be widely applied in conveying ore, coal ash and river bait-casting mud.
7. Agricultural irrigation pipe HDPE pipe has the merits of great flow and good impact resistance, it is the ideal tool for agricultural irrigation.
The range of tests performed on polyethylene pipes usually includes tests for taste, odor, appearance of water, and growth of aquatic microorganisms. In most countries, this is a broader test range than currently applied to traditional pipe materials such as metal, cement, and cement lining products. Therefore, under most operating conditions, PE pipes can be used for drinking water supply.
HDPE Pipe for Water Supply must be able to withstand a certain pressure. Generally choose polyethylene resin with high molecular weight and good mechanical properties. For example, HDPE resin has the characteristics of low tensile strength, poor pressure resistance, poor rigidity, poor dimensional stability during molding, and difficulty in connection. Material suitable for water supply pressure pipes. However, due to its high health index, HDPE resin has become a common material for the production of drinking water pipes. The melt viscosity of HDPE resin is small, fluidity is good, and it is easy to handle. Therefore, its melt index can be selected in a wide range, usually between 0.3 and 3 g/10 minutes.
HDPE drainage pipe is actually a high-density polyethylene double-wall corrugated pipe. Its main feature is its external structure, especially a ring-shaped corrugated structure. In fact, this design is useful, which greatly increases the pipeline. The stiffness of the ring increases the resistance of the pipe to the soil load. This is an advantage, no pipes can be replaced, and HDPE pipes are cheaper. This is also a price advantage. The pvc drainage pipe is mainly insensitive to external temperature, the pipe bursting water phenomenon is small, the heat preservation effect is good, and it is convenient to not produce condensed water. As for which one to choose, I think everyone has their own advantages.
High-quality raw material is the core of the product.
Our products are manufactured with excellent materials like BOREALIS, BASELL, TOTAL,
DAELIM, SABIC, etc, which ensure the quality satisfying your demand.
Specifications | |||||
Standard:ISO4427; EN12201; ASTM D3035; AS/NZS 4130; GB/T 13663. | |||||
Nominal Pressure | 0.6MPa | 0.8MPa | 1.0MPa | 1.25MPa | 1.6MPa |
SDR | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 |
DN(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) |
16 | 2 | ||||
20 | 2 | 2.3 | |||
25 | 2 | 2.3 | |||
32 | 2.3 | 2.4 | 3 | ||
40 | 2.3 | 2.3 | 3 | 3.7 | |
50 | 2.3 | 2.9 | 3.7 | 4.6 | |
63 | 2.3 | 3 | 3.6 | 4.7 | 5.8 |
75 | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 |
90 | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 |
110 | 4.2 | 5.3 | 6.6 | 8.1 | 10 |
125 | 4.8 | 6 | 7.4 | 9.2 | 11.4 |
140 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 |
160 | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 |
180 | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 |
200 | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 |
225 | 8.6 | 10.8 | 13.4 | 16.6 | 20.5 |
250 | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 |
280 | 10.7 | 13.4 | 16.6 | 20.6 | 25.4 |
315 | 12.1 | 15 | 18.7 | 23.2 | 28.6 |
355 | 13.6 | 16.9 | 21.1 | 26.1 | 32.2 |
400 | 15.3 | 19.1 | 23.7 | 29.4 | 36.3 |
450 | 17.2 | 21.5 | 26.7 | 33.1 | 40.9 |
560 | 21.4 | 26.7 | 33.2 | 41.2 | 50.8 |
630 | 24.1 | 30 | 37.4 | 46.3 | 57.3 |
710 | 27.2 | 33.9 | 42.1 | 52.2 | / |
800 | 30.6 | 38.1 | 47.4 | 58.8 | / |
900 | 34.4 | 42.9 | 53.3 | ||
1000 | 38.2 | 47.7 | 59.3 | ||
1200 | 45.9 | 57.2 | 70.6 | ||
1400 | 53.5 | 66.7 | 82.4 | ||
1600 | 61.2 | 76.2 | 94.1 | ||
1800 | 69.1 | 85.7 | 105.9 |
HDPE Pipe for Water Supply Properties | |||
Characteristic | Requirements | ||
Specific Gravity, g/cm³, (20℃) | 0.941-0.965 | ||
Longitudinal Reversion, %, (110℃) | ≤3 | ||
Oxidation Induction Time, min, (200℃) | ≥20 | ||
Extension Rate at Break, % | ≥350 | ||
Melt Mass Flow Rate, g/10min(195℃, 5kg) | Change of MFR by processing ±20% | ||
Hydrostatic Strength | |||
1)20℃, Hoop Stress: PE100 12.4Mpa, PE80 9.0Mpa, 100h | No Failure | ||
2)80℃, Hoop Stress: PE100 5.4Mpa, PE80 4.5Mpa, 165h | No Failure | ||
3)80℃, Hoop Stress: PE100 5.0Mpa, PE80 4.0Mpa, 1000h | No Failure |
Introduction | |||
Place of Origin: | Handan City, China. | Standard: | ISO 4427/EN12201/AS4130/ASTMD3035 |
Brand Name: | RTF | Certification | BV/SGS/TUV/CE/OTC |
Material: | 100% Virgin raw material | Connecting Method: | Butt welding; Flanged connection |
Nominal Diameter: | OD 1600mm | Marking: | Customized laser marking on surface |
Nominal Pressure: | PN 12.5 at maximum | Manufacturing Ability: | At least 100 meters/2 days |
Color: | Black with blue stripe or customized | Additional Service: | ODM& OEM Service available |