A PE pipe in the PE water pipe, the difference between it and PVC water pipe, specifically:
1: THE standard of PE water supply pipe is GB/T13663-2000, and the standard of PVC water supply pipe is GB/T10002.1-2006.
2: THE toughness of THE PE water pipe is good, and the strength of the PVC water pipe is good. In addition, PE pipe impact resistance is good, can be used at minus 20 degrees this temperature.
3: PE pipe is hot melt connection, and PVC pipe is bonded by adhesive or elastic sealing ring.
4: in cost, PVC water pipe is lower, because its engineering material cost is lower.
5: PE pipe health performance is better than PVC pipe, because its additives are less.
6: PE water pipe can be made into coils, and PVC water pipe can not.
B PE pipe, whether it can be used instead of ordinary iron pipe?
PE pipe, which is generally made of polyolefin material two-color co-extrusion, and modified by irradiation processing, so, it has high strength, corrosion resistance and non-toxic harmless and other advantages, so, it is used in the water pipe, instead of ordinary iron pipe, is very good, because it will not rust.
C PE pipe hot melt butt, what is the specific?
PE pipe hot melt docking, from a professional point of view, the connection interface is flat, is the two form the same connection section with hot plate heating to viscous flow state, the hot plate removed, at the same time, apply a certain pressure on the connection interface, so that can be cooled and solidified, so as to form a firm connection.